Drones
SPD25 Pilot SPD25 AI Pro Powerline Industrial Cleaning About Contact Get a Quote →
ProxGrid SPD25 Pilot pressure washing drone, front three-quarter view with spray boom and battery pack
Home/Drones/SPD25 Pilot
Pre-order now · Deliveries starting soon

Meet the SPD25 Pilot.
Built for industrial cleaning.

A rugged pressure washing drone for façades, roofs, tanks and plant. It reaches surfaces 50 metres up, carries up to 13 kg and flies up to 50 minutes, with your crew on the ground.

A$24,900Includes 2 batteries & charger · shipping quoted separately
See the specs
Designed and manufactured in Australia
13kg
Payload
capacity
50min
Flight time
(no payload)
50m
Pressure washing
height
24.9kg
Maximum
takeoff weight
The SPD25 in flight against a blue sky, spraying a high-pressure jet of water at a test structure, fed by a blue hose from the ground
Industrial

A rock-stable
platform.

Performs exceptionally at high pressure, more than 30 metres up, and holds steady in windy, gusty conditions.

SPD25 Pilot seen from the front, with its spray boom, HD camera and GNSS antenna
In the box

Everything you need
to start cleaning.

The SPD25 Pilot is built for one job and built to do it every day: carry a high-pressure line to the surface and hold the nozzle where the pilot puts it. It comes with a pair of batteries and a charger, so it is ready to fly the day it arrives.

Price
A$24,900
Airframe
Rugged, quick-release foldable arms
Spray system
Spray boom with quick-connect nozzle fitting
Camera
HD camera
Positioning
RTK GNSS · u-blox ZED-F9P, helical antenna
Controller
Pro controller · Android, live video
Power
2 × 6S LiPo batteries (shipped separately) · charger
Origin
Australia

Rotate it, fold the arms and pick a colour: with radar, dual GNSS, hose and pump.

Add-ons

Start lean.
Add what your sites need.

The Pilot does the job as it comes. Add sensing and redundancy for tighter, busier or more demanding sites.

+A$1,500
Front radar

A front-facing radar measures the distance to the wall, helping the pilot keep the nozzle at a steady working distance on façades and tanks.

+A$1,300
Dual GNSS

A second RTK GNSS receiver adds redundancy and a baseline heading (a GPS compass), so heading stays reliable near steel tanks and structures where a magnetic compass struggles.

Ground kit
Hose & pump

Add a lightweight high-pressure hose and, in Australia, a matched pressure washer pump, so the whole setup arrives together.

Batteries

Standard batteries.
Buy spares direct.

The SPD25 Pilot flies on a pair of standard 6S LiPo batteries. Two come with every drone, shipped separately, and we recommend the Tattu 22000mAh 6S 22.2V LiPo.

For spares, buy straight from a battery supplier. You skip our margin and the double postage, and any pair of 6S batteries of around 22,000 mAh with an XT90 anti-spark connector will fit.

Recommended
Tattu 22000mAh 6S 22.2V LiPo
Configuration
2 × 6S, used as a pair
Capacity
Around 22,000 mAh each
Connector
XT90 anti-spark
Included
2 batteries (shipped separately)
Spray boom included

Standard fittings.
Any nozzle you need.

The spray boom uses standard pressure washing quick-connect fittings, so you can fit the nozzle that suits the surface and the job. Pressure clean surfaces up to 50 metres high.

Swap nozzles in seconds: rotating (turbo) nozzles for stubborn grime, wide-fan nozzles for large flat areas, or angled nozzles for awkward surfaces.
Ground-fed water line: the hose connects to the airframe through a standard high-pressure quick-connect fitting.
Aim with confidence: the built-in HD camera streams a low-latency feed to the Pro controller, so the pilot sees the spray hit.
SPD25 Pilot from behind, showing the blue high-pressure hose and brass quick-connect fitting
The SPD25 Pilot's Pro controller: a handheld unit with a large touchscreen, two control sticks, programmable buttons and two antennas
Pro controller included

Everything in
your hands.

The SPD25 Pilot comes with a Pro controller: a built-in Android system and a large touchscreen in one handheld unit, with the live video feed from the drone right in front of the pilot.

Live video: the HD camera feed streams straight to the screen, so the pilot sees the spray hit.
Built-in Android: no phone or tablet to mount or keep charged.
Programmable buttons: dedicated controls within reach of both thumbs.
Ground setup

No special pumps.
No special parts.

The SPD25 Pilot connects to standard high-pressure hose and works with the kind of pressure washer pumps your crew already uses.

01
Pump
Any standard pressure washer

Use a pump you already own, or add one when you order (Australia). The Pilot supports pumps up to 30 L/min and 3000 PSI.

02
Hose
Standard high-pressure hose

Hose and fittings are standard high-pressure parts. A lightweight hose is also available with your order.

03
SPD25 Pilot
Connect and fly

The hose clicks onto the airframe through a brass quick-connect fitting and feeds the spray boom.

Max pump flow
30 L/min
Max pump pressure
3000 PSI (207 bar)
Hose
Standard high-pressure
Lightweight hose
Available with your order
Built for the job

Made for long days
on real sites.

Quick-release foldable arms for the vehicle, standard batteries that swap between flights, and an open frame that's easy to keep clean.

SPD25 Pilot seen from directly above, arms extended
Top
SPD25 Pilot from a low front angle, landing gear and hose coupling visible
Front
SPD25 Pilot side view with the spray boom extended forward
Side
Transport

Full size in the air.
Compact in the vehicle.

Fold the arms and propellers and the SPD25 Pilot goes from 1670 mm across to 470 × 465 mm, about a twelfth of its flying footprint. It rides in a standard work vehicle and comes out ready to fly.

Flight ready
SPD25 Pilot seen from above with all four arms unfolded and the spray boom pointing forward
Folded for transport
SPD25 Pilot seen from above at the same scale with its arms and propellers folded alongside the body
Folded size excludes the spray boom and hose
Compare

Two drones.
Two different jobs.

Both sit in the sub-25 kg class, but they're built for different work. The SPD25 Pilot is for everyday industrial cleaning, where return on investment, reliability and cost matter most. The SPD25 AI Pro is for the most demanding jobs, usually powerline work, that need automation, autonomous navigation, shielded electronics and advanced sensors processed in the air.

Feature SPD25 PilotIndustrial cleaning SPD25 AI ProDemanding & powerline work
Built forGeneral industrial cleaning: façades, roofs, tanks and plantHighly demanding jobs that need automation, usually powerline work
What matters mostReturn on investment, reliability and low costAutonomy, shielding and onboard intelligence
AvailabilityPre-order now · deliveries starting soonComing 2027 · waitlist open
PriceA$24,900, incl. 2 batteries & charger; shipping quoted separatelyOn request
AirframeRugged industrial airframe, foldable armsDedicated airframe with shielded electronics
Weight class24.9 kg MTOW (small RPA)24.9 kg MTOW (small RPA)
PayloadsSpray boomSpray boom, plus advanced sensors with real-time onboard processing
Autonomous navigationNot availableYes
Onboard AI computeNot availableNVIDIA Jetson Orin NX
Shielded electronicsNot availableStandard, for noisy environments such as near powerlines
360° LiDARNot availableStandard
RadarFront radar for wall distance, option +A$1,500Built in, standard
RTK positioningRTK GNSS (u-blox ZED-F9P, helical antenna); dual GNSS option +A$1,300Dual RTK GNSS, standard
Camera & controllerHD camera · Pro controller, Android, live videoHD camera · Pro controller, Android, live video
Get yoursSign up for waitlist
Technical specifications

The full
numbers.

Need more detail? Get in touch and we'll send the full specification.

Airframe
Maximum takeoff weight
24.9 kg (Small RPA)
Rotor configuration
Quadcopter
Arms
Quick-release, foldable
Wheelbase
1260 mm (diagonal, motor to motor)
Dimensions (flight, incl. propellers)
1670 × 1670 × 435 mm
Dimensions (folded, excl. boom & hose)
470 × 465 mm
Propeller diameter
30 in (762 mm)
Performance
Payload capacity
Up to 13 kg
Endurance (no payload)
Up to 50 min
Pressure washing height
Up to 50 m
Max pump flow · pressure
30 L/min · 3000 PSI
Power
Batteries
2 × 6S LiPo (22.2 V), used as a pair
Capacity
Around 22,000 mAh per battery
Connector
XT90 anti-spark
Recommended
Tattu 22000mAh 6S 22.2V LiPo
Included
2 batteries (shipped separately) · charger
Charge time
About 1 hour (1C fast charger)
Control & sensing
Positioning
RTK GNSS · u-blox ZED-F9P, helical antenna (NTRIP)
Dual GNSS (redundancy, GNSS heading)
Option, +A$1,300
Front radar (distance to walls)
Option, +A$1,500
Camera
HD camera, low-latency video to controller
Controller
Pro controller, Android, live video
Control link
2.4 / 5 GHz dual-frequency
Pre-order the SPD25 Pilot. Deliveries starting soon.

Build yours, send it through, and we'll come back to you with a confirmed quote and delivery date. Want to see it first? Book a trial on your site.

Book a trial