Drones
SPD25 Pilot SPD25 AI Pro Powerline Industrial Cleaning About Contact Get a Quote →
13kg
Payload
capacity
50min
Flight time
(no payload)
50m
Pressure washing
height
24.9kg
Maximum
takeoff weight
ProxGrid SPD25 with spray boom and hose fitting, standing next to its Pro RC controller
At a glance

Most drones look.
This one does the work.

Most drones are cameras with propellers. They inspect, film and report, and someone still has to go up and do the job. The SPD25 AI Pro is built to do the job itself: it carries up to 13 kg, feeds a high-pressure line to its spray boom, and holds position to the centimetre while it works, with LiDAR, radar and onboard compute built in.

Maximum takeoff weight
24.9 kg (Small RPA)
Payload capacity
Up to 13 kg
Flight time
Up to 50 min (no payload)
Pressure washing height
Up to 50 m
Included
Spray boom · Pro controller · 360° LiDAR · Radar
Onboard compute
NVIDIA Jetson Orin NX
Price
On request · Coming 2027
Primary applications
Pressure washing · Heavy-lift payloads
Origin
Australia

Full specification sheet available on request: contact us

Spray boom included

Standard fittings.
Any nozzle you need.

The spray boom uses standard pressure washing quick-connect fittings, so you can fit the nozzle that suits the surface and the job. Pressure clean surfaces up to 50 metres high.

Swap nozzles in seconds: use rotating (turbo) nozzles for stubborn grime, wide-fan nozzles for large flat areas, or angled nozzles to reach awkward surfaces.
Ground-fed water line: the hose connects to the airframe through a standard high-pressure quick-connect fitting.
Aim with confidence: the built-in HD camera looks straight down the boom, so the pilot sees the spray hit.
Side view of the SPD25 showing the spray boom with its quick-connect nozzle fitting and the ground-fed hose connection
Ground setup

No special pumps.
No special parts.

The SPD25 connects to standard high-pressure hose and works with the kind of pressure washer pumps your crew already uses. The ground equipment is standard, off-the-shelf pressure washing gear, not a specialist system.

01
Pump
Any standard pressure washer

Use a pump you already own, or buy one off the shelf. The SPD25 supports pumps up to 30 L/min and 3000 PSI. No proprietary pump required.

02
Hose
Standard high-pressure hose

Hose and fittings are standard high-pressure parts, available from pressure washing suppliers. A lightweight hose is also available through ProxGrid.

03
SPD25
Connect and fly

The hose clicks onto the airframe through a brass quick-connect fitting and feeds the spray boom.

Max pump flow
30 L/min
Max pump pressure
3000 PSI (207 bar)
Hose
Standard high-pressure
Lightweight hose
Available from ProxGrid
Underside of the SPD25 body showing four M4 mounting points and the PCP payload connection port
Underside · 4× M4 mounts and PCP port
Payload interface

Bolt it on.
Plug it in.

Every SPD25 has a standard mounting pattern and a Payload Connection Port (PCP) on its underside. Fit your own sensor, tool or actuator with four bolts and one connector, and power and control it from the drone.

Mounting
Fasteners4× M4
Pattern130 × 140 mm
Ground clearance255 mm*
PCP · Power
24 V10 A
12 V2 A
5 V2 A
PCP · Data & control
UARTTo flight controller
PWMServos & actuators
CAN busYes

* Mounting face to ground. Longer landing gear is available as an add-on for taller payloads.

Built into the AI Pro

Thinks on board.
Works where it's noisy.

The AI Pro adds the hardware for demanding sites: an onboard computer that processes its sensor data on the drone, and electronics shielded against interference.

Onboard compute
NVIDIA Jetson Orin NX

A dedicated AI computer on the drone processes LiDAR, radar and camera data in flight, without relying on a ground station or a data link.

Electronics
Shielded for noisy environments

Shielded electronics for sites with strong electromagnetic interference, such as work close to powerlines. Shielding is not an HV rating: powerline operation is still in development.

Standard
LiDAR, radar and dual RTK

360° LiDAR, built-in radar and dual-antenna RTK GNSS with GNSS heading come fitted, as the sensing behind autonomous navigation.

Built for the job

Made for long days
on real sites.

Every part of the SPD25 is chosen to keep it flying, cleaning and earning, not sitting in the workshop.

SPD25 smart battery seated in its rear bay, with charge level indicator
Battery
Up to 50 minutes in the air

An industrial high-capacity smart battery gives up to 50 minutes of flight time with no payload. It slots into a rear bay with the charge level on show, so swapping between flights is quick.

Close-up of the SPD25's forward-facing HD camera in the nose of the airframe
Camera
See the spray as it lands

A built-in HD camera streams a low-latency feed to the controller, so the pilot can aim the spray precisely and confirm the surface is clean before moving on.

Orange quick-release latch locking a carbon fibre arm to the SPD25 body
Foldable arms
Quick-release, tool-free

Each carbon fibre arm locks out with a single quick-release latch. Flip the latches and the arms fold back against the body, ready for the vehicle.

Transport

Full size in the air.
Compact in the vehicle.

Fold the arms and propellers and the SPD25 goes from 1670 mm across to 480 × 680 mm, about an eighth of its flying footprint. It rides in a standard work vehicle and comes out ready to fly.

Flight ready
SPD25 seen from above with all four arms unfolded and the spray boom pointing forward
Folded for transport
SPD25 seen from above at the same scale with its arms and propellers folded alongside the body
Spray boom detaches for transport
Payloads

Pressure washing first.
Ready for whatever's next.

The SPD25 ships with its spray boom, and its 13 kg lift capacity means the same machine can carry other payloads when the job calls for it.

Included
Spray boom

Pressure clean surfaces up to 50 metres high: building facades, roofs, tanks, silos, and industrial structures. The spray boom attachment comes with every SPD25.

See cleaning applications
Optional
Inspection payload

Sensor and imaging package for condition assessment, defect identification, and pre/post-operation documentation.

Detailed specs to follow

Up to 13 kg
Your payload

Need to lift something else? With up to 13 kg of payload capacity, the SPD25 can carry custom equipment on its standard M4 mounts and PCP port. We'll work through the integration with you.

See the payload interface
Compare

Two drones.
Two different jobs.

Both sit in the sub-25 kg class, but they're built for different work. The SPD25 Pilot is for everyday industrial cleaning, where return on investment, reliability and cost matter most. The SPD25 AI Pro is for the most demanding jobs, usually powerline work, that need automation, autonomous navigation, shielded electronics and advanced sensors processed in the air.

Feature SPD25 PilotIndustrial cleaning SPD25 AI ProDemanding & powerline work
Built forGeneral industrial cleaning: façades, roofs, tanks and plantHighly demanding jobs that need automation, usually powerline work
What matters mostReturn on investment, reliability and low costAutonomy, shielding and onboard intelligence
AvailabilityPre-order now · deliveries starting soonComing 2027 · waitlist open
PriceA$24,900, incl. 2 batteries & charger; shipping quoted separatelyOn request
AirframeRugged industrial airframe, foldable armsDedicated airframe with shielded electronics
Weight class24.9 kg MTOW (small RPA)24.9 kg MTOW (small RPA)
PayloadsSpray boomSpray boom, plus advanced sensors with real-time onboard processing
Autonomous navigationNot availableYes
Onboard AI computeNot availableNVIDIA Jetson Orin NX
Shielded electronicsNot availableStandard, for noisy environments such as near powerlines
360° LiDARNot availableStandard
RadarFront radar for wall distance, option +A$1,500Built in, standard
RTK positioningRTK GNSS (u-blox ZED-F9P, helical antenna); dual GNSS option +A$1,300Dual RTK GNSS, standard
Camera & controllerHD camera · Pro controller, Android, live videoHD camera · Pro controller, Android, live video
Get yoursPre-order nowSign up for waitlist
Technical specifications

The full
numbers.

Need more detail? Get in touch and we'll send the full specification.

Airframe
Maximum takeoff weight
24.9 kg (Small RPA)
Empty weight
11.9 kg (with battery)
Rotor configuration
Quadcopter
Arms
Quick-release, foldable
Wheelbase
1260 mm (diagonal, motor to motor)
Dimensions (flight, incl. propellers)
1670 × 1670 × 435 mm
Dimensions (arms out, props folded)
980 × 980 × 435 mm
Dimensions (fully folded, boom off)
480 × 680 × 435 mm
Propeller diameter
30 in (762 mm)
Performance
Payload capacity
Up to 13 kg
Endurance (no payload)
Up to 50 min
Power & systems
Battery
12S1P smart battery, 44.4 V nominal
Battery capacity
30,000 mAh · 1332 Wh
Continuous discharge
60 A
Cycle life
500+ cycles
Charge time
About 1 hour (1C fast charger)
Redundancy
Dual-redundant internal 5 V power supply
Control & data
Control link
2.4 / 5 GHz dual-frequency
Control link range
Up to 40 km
Video link
HD, low-latency to controller
Payload mounting
4× M4, 130 × 140 mm
Payload ground clearance
255 mm (longer landing gear available)
Payload port (PCP)
24 V 10 A · 12 V 2 A · 5 V 2 A · UART · PWM · CAN
Positioning
Dual-antenna RTK GNSS with GNSS heading (NTRIP)
Obstacle sensing
360° LiDAR & radar (standard)
Onboard compute
NVIDIA Jetson Orin NX
Electronics
Shielded for electrically noisy environments
Controller
Pro controller, 7-inch 1080p screen
Controller battery
Up to 11 hours per charge
The AI Pro arrives in 2027. Be first in line.

Join the waitlist and we'll keep you posted on availability and pricing. Need a drone sooner? The SPD25 Pilot is available to pre-order now.